Home » Products & Solutions » Weighing and Dosing Systems » Dosing chute / Vibratory feeder

Dosing chute / Vibratory feeder

Continuous feeding of bulk materials, accurate to the gram. The VOLKMANN vibrating feeder can be used in a variety of ways and, in combination with a vacuum conveying system and a level indicator control, is ideal for the automation of feeding processes.

pic.: dosing chute

Depending on the application, the open vibrating chute or the closed hygienic dosing tube is recommended; both systems are easy to clean.

In combination with a vacuum conveyor and a material buffer, it is possible to implement various types of weighing.
One example is negative weighing or dosing with a vibrating chute. Depending on the type of material, an accuracy of up to 1g per cycle can be achieved.

It is also possible to change a discontinuous feeding process into a continuous feeding process. And this at a capacity of up to 1000 kg/h.

You can find more information in our leaflet.


  • continuous material feed
  • accuracy up to 1g (depending on product)
  • effective and gentle operation
  • easy cleaning
  • can be used in EX areas
  • low wear
  • low noise
  • surfaces in contact with product in stainless steel AISI 304 or AISI 316


  • vibration channel as open or closed U-profile
  • vibration channel as closed tubular profile
  • clamp connections at inlet and outlet
  • length and width of the vibration trough to suit customer requirements


  • weighing modules
  • dust-tight design
  • can be combined with sieving
  • quick-change sieve insert

Request a Callback

Tell us your phone number and the required time for the recall. Describe in brief your concern. We will contact you as soon as possible during our business hours.
Volkmann GmbH, Germany: +49 (0)2921 9604 0, business hours Mon. – Thurs.: 07:45 – 16:45, Fri.: 07:45 – 14:45
Volkmann UK Office: +44 (0) 1494 51 22 28

    Company *

    ZIP *

    City *

    Country *

    Gender *

    First Name *

    Last Name *

    E-mail *

    Tel. *

    Callback request *

    Subject *


    Data protection provisions *

    Travel to Volkmann GmbH in Soest impaired due to roadworks

    Visits to Volkmann GmbH in Soest will be considerably affected by roadworks over the next few weeks. The approach via the A44 motorway is particularly affected. A diversion will be set up, which will extend the journey by approx. 2 km or 5-10 minutes. The normal route from Volkmann to the motorway will remain open.

    The construction site and the diversion have been announced by the city of Soest for the period from 23 April to 17 July 2024.

    We show a map with the diversions route on page: